Riden RD6006 Mini Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a small bench-top case for a combination of a 48V LED power supply and a Riden RD6006 DC Power Supply. To complete this, you'll need:
- 1x Riden RD6006 DC Power Supply
- 1x 48V 100W LED Power Supply
- 1x C13 Socket (or any other with 40mm screw hole pitch)
- 2x M3x8 BHCS Machine Screws (best colour: Black)
- 2x 3mm x 15mm FHCS Philips Head Screws
- Roll of EVA Foam for feet (Optional)
Use an M3 tap to drill out the 2 holes for the Machine Screws first. You'll need a ball head Allen wrench to screw in the corner machine screw with the Allen wrench at a slight angle. Screw in this corner screw first, most of the way, then install the power supply and the second screw. Install the wires to the LED Power Supply before installing in the case. Connect everything up as seen in the photos, and enjoy!
A note about the linked LED Power Supply: although it's listed as a 2A, 100W power supply, its over current protection kicks in at 1.4A, roughly 60W. It's enough for my use, your mileage may differ.