boycabrera - CNC Toes Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and simple way to secure your workpiece to your CNC work surface!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you need an easy-to-use method for securing workpieces to your CNC table?
Well here is a simple way to accomplish this!
This project began as a custom request from a customer, but I think it is time to share it with the rest of the community!
Just slide one of the Toe Clamps onto a T-Bolt and tighten the Knurled Knob until your wood, metal, or plastic workpiece is secured!
This system can secure items ranging from 3mm to 25mm tall.
Print Recommendations:
Layer Height: 0.25
Walls: 3-4
Infill: 25% Honeycomb
Orientation & Supports: TREE & NORMAL Supports, as required based on the Orientation
- TOE CLAMPS: For enhanced strength, I would recommend printing each Toe Clamp on their side and using TREE supports to secure the floating regions
- KNURLED KNOBS: Print upright and then you don't need supports
- KNOB CAPS: Print upside-down and use NORMAL Supports to support the outer region
Required Hardware:
(I suggest using 5/16" Hardware, but you could easily use ¼" or the Metric equivalent)
- One T-Bolt per Toe Clamp in your preferred size
- One Hex Nut per Knurled Knob in your preferred size
- OPTIONAL: One Washer/Spacer per Toe Clamp in your preferred size
It is honestly a super simple concept and works quite well.
Enjoy!