Cat Rattle Toy Ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fun toy ball for your cat that's easy to print and requires no supports or glue to assemble.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you like cats? Do you like fun? Do you like endless sleepless nights?! Then the Cat Rattle Toy Ball is 24/7 fun for your cat! No supports or glue are needed. Assembles using a locking pin to securely connect both ball halves together.
Because every spool of filament can vary in composition, you may have to adjust the locking pin slot/hole size using the X-Y hole compensation setting. I suggest adjusting the setting by (+/-) .1mm increments to get the best fit and to make it easier to assemble.
Quality > Precision > X-Y hole compensation: .1mm increments
Assembly Instructions:
- Firmly insert the locking pin into a ball half making sure that the notch is oriented correctly. Half of the pin should be exposed after insertion.
- Insert the alignment ring into the outer channel of that same ball half.
- Add rattle bits.
- Now align the other ball half with the alignment ring and locking pin. Make sure that the notch on the locking pin is oriented correctly.
- Push both halves together firmly. They should be both flush with each other.