1 / 1
Prusa Core One rear exhaust vent to window vent adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vent your Core One out the window using standard 4" dryer vent hose and these adapters.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 2269
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (95)Powiązane
This is an adapter to vent the Core One out the window using standard 4" dryer vent hose. Some parts require supports, and are a little challenging, but the 3mf I posted is a project file showing the final settings I used to print. I used black PETG.
