BoxTurtle - TurtleNeck Magnetic Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A redesign of the stock TurtleNeck mount, but utilizing 6x3 magnets for better hold
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 120
- Wydruki
- 3
- Wyświetlenia
- 541
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found that the TurtleNeck mount bracket on ArmorTurtle/TurtleNeck Github was too loose to hold the TN upside down when mounting it to the Box Turtle itself (like Steve Builds did on his build).
Borrowed the idea from @ViktorvonDue's TurtleNeck magnetic mount but redesigned a new mount similar to the stock mount but with 4 magnets that are aligned with the TurtleNeck screws to hold it more firmly.
I also took the opportunity to make the mounting flange wider to accommodate a M3 roll-in T-Nut, which was not possible on the stock design.
You'll need:
- Qty 4 of the 6x3 round magnets (same size used in the Box Turtle and other Voron items). Polarity doesn't matter here, since the magnets are holding against the SHCS in the TurtleNeck.
- Likely CA / super glue to hold the magnets in, especially if your print tolerances are good (I didn't get fancy with the magnet sockets).
- M3 Roll-in T-Nut (or hammer nut).
- M3x8 SHCS (M3x10 SHCS should also work I guess).
Inspiration:
https://github.com/ArmoredTurtle/TurtleNeck/blob/main/STLs/TN_horizontal%20mount.stl
https://www.printables.com/model/1191141-turtleneck-boxturtle-magnetic-mount