CTC 3D Bowden motor bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi,Decided to upgrade CTC 3D with E3D v6 hotends. It was clear that some kind stepper motor bracket are needed for…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Hi,
Decided to upgrade CTC 3D with E3D v6 hotends. It was clear that some kind stepper motor bracket are needed for bowden setup, so I designed my own. Hope you like it.
On T-part, use M3 theat tap to make threat, open holes with 2,5mm drill if needed. For assembly you need also 6pcs M3x12 hex socket screws and 2pcs of nut. Tighten screws of T-part only necessary amount to support motors.
Incase of E3d v6 hotends on CTC, here's cooling duct too: http://www.thingiverse.com/thing:1932246
Extruders on pictures: http://www.thingiverse.com/thing:1359438
E3D v6 CTC 3D mount: http://www.thingiverse.com/thing:1655253
Print Settings
Printer:
CTC 3D
Rafts:
No
No
Resolution:
0,2
30%
Category: 3D Printing