Claw Mounting Bracket for SparkFun Robotics Claw MkII
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The SparkFun Robotics Claw MkII (part # ROB-11524) is a big improvement on their mark 1 model. The new Pan/Tilt MKII…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
The SparkFun Robotics Claw MkII (part # ROB-11524) is a big improvement on their mark 1 model. The new Pan/Tilt MKII bracket (part # ROB-11674) is also nice (if a tad pricey). Unfortunately the instructions to mount a claw to the Pan/Tilt bracket show the MkI claw. It wasn't apparent how I should mount the claw on the pan/tilt bracket with the included parts, so I designed this mounting bracket.
This is the first thing I've designed for printing. Done on 123D Design online. The file w/o mounting holes are in case anyone wants to shift the holes - they weren't quite aligned, so I just drilled them out to mount. Also, the file downloaded directly from the app were corrupted. The file with "_apu" was made by downloading the file through the Autodesk Print Utility app. The one with "_dt" was made by downloading the .smb file and bringing it into the desktop version of the program.
Printed the "apu" version with MakerBot Replicator 2.
Category: Robotics