1 / 4
Vtx and MicroMinimOSD holder for ZMR250 — zdjęcie 1
1 / 4

Vtx and MicroMinimOSD holder for ZMR250

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hi,this is holder for Aomway 200mW Vtx and Micro Minim OSD. One goal was to have easy access to channel dip switches,…

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Hi,

this is holder for Aomway 200mW Vtx and Micro Minim OSD. One goal was to have easy access to channel dip switches, so when racing with friends there's no need to tear down complete quad ;) Work is still in progress, got to figure out better fixing for MicroMinim than Ty-Rap through the slots.

Included .skp file also, if you like to modify it by yourself :) Fits on stand off's diameter 5,1mm and pitch 51,3mm. Vtx hole might need some filing.. Use washer/s to have nice clearance as you tighten SMA/RP-SMA. As tightened, extension cable or antenna should not have axial play on connector.

Ideas are well come.. Have Fun!

Print Settings

Printer:

CTC

Rafts:

No

**Supports:**

Yes

Resolution:

0,2

**Infill:**

30

Category: R/C Vehicles

Tagi