1 / 2
Baofeng Radio Oversized Belt Clip. — zdjęcie 1
1 / 2

Baofeng Radio Oversized Belt Clip.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an oversized clip to replace the one found on Baofeng radios fitting the UV5R pattern with extended batteries.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model was printed in PLA+ on a Creality Ender 3 Pro.

 

This model only fits radios with the extended battery.

Some of the knurling is worn off and the clip is bent in the photo, this is after a year of regular use.

 

Infill: I used 80% but this is personal preference.

Supports: NO (Print the flat side facing down)

Adhesion: NONE

Tagi