Siemens (BSH) fridge vegetables Flap hinge repair

This part repairs the broken hinge of the flap of a Siemens (BSH) Fridge with vegetable drawer.

This model involves some other parts and tools you might need. 

1. Print the part with the surface towards the build plate that will face the other part of the hinge (the hinge pin). 
2. Take a file and file down your hinge until the part fits. I filed it down with an approximate angle of 37°. (At least that is what I measured and then used in the CAD file). I filed away 5 mm axially. 
   Use the STEP file if you need to modify that angle. 
3. Slide the part on the hinge
4. Mark and drill the hole with a 4mm drill bit
5. use an M4 Screw (15mm will do) with a nut to secure it in place. 

Remarks: 

• Mirror the part if you need to repair the right hinge.
• One picture shows the still intact right hinge.