Tortilla Basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple basket for flour or corn tortillas
- Ocena
- 4,667 / 5
- Polubienia
- 26
- Pobrania
- 142
- Wydruki
- 3
- Wyświetlenia
- 740
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This beautiful model was created by yours truly.
If you have a 3D printer in which all sides are at least 200mm in size then the models should ft nicely. There are two baskets in the folder: the OG size and the small size. The OG size is meant for both flour and corn tortillas, but the small one is mainly meant for small corn tortillas. The OG size print time is quite lengthy but is well worth it if you eat flour tortillas quite frequently like me. The inner diameters are 185 mm and 111 mm, respectively. Scale and fold tortillas as needed.
I recommend you print the model in PETG to get a good air-tight print, plus higher heat resistance, but PLA is just fine. Regardless of the material, make sure to insert a cloth to separate the base of the basket and the tortilla. The cloth helps absorb moisture from the steam and adds a layer of heat resistance. No one likes a moist tortilla!
Other than that, the lid should slide into place with ease.
Settings [Lid]:
- Infill = 5% (10% for small version)
- Perimeters = 2
Settings [Basket]:
- Infill = 15%
- Perimeters = 2 or 3
Hope you enjoy it, and happy printing! 🥳