Ubiquiti Unifi Cloud Gateway Ultra mount (screw and SKÅDIS versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Ubiquiti Unifi Cloud Gateway Ultra
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 684
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Snug fit which should hold the router in snuggly without needing to force the router in.
SKÅDIS and screw mount variations available. Screw mount is designed for 3 mm screw. I haven't printed the screw version. Screw hole is designed with 3,2 mm hole and 1,7 mm chamfer which should be ok for 3mm wall screw
SKÅDIS version needs supports due to the the SKÅDIS legs needing to be bit higher up than the bottom. Screw version should be ok without supports.
I printed the part with 0,8 mm nozzle but should work with 0,4 mm as well. Should be printed with the cable opening facing the build plate.
Part is designed for router without rubber feet installed.