Parametric Tamper Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric tamper stand with recesses for magnets and feet.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a parametric stand for espresso tampers.
I borrowed the basic shape and hex pattern inlay design from @NathanJ7C's design here: https://www.printables.com/model/328389-58mm-espresso-tamper-stand-version-2 but this is designed from scratch in Fusion360 so I can make it parametric.
By default it's set up for 3M SJ5302T bumpons (I added holes for 6 but you only really need 3). The magnets are 6mm diameter, 3mm deep, but of course you can alter them to your needs.
I've exported some STLs for 58mm and 54mm tampers, they both have 1mm clearance for maximum compatibility so if you want something with a better fit or a different size you can download the .f3d and generate your own.