Toy Screwdriver with interchangeable blades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toy screwdriver for kids.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Idea:
I really liked The Toy Screwdriver from Michael Fortin. Unfortunatly, my kid broke it. I didn't want to reprint the whole screwdriver and glued it together. This was the key point to remix the design. I redesigned the whole screwdriver in FreeCAD with an M16 thread with a special tolerance. So it's possible to just reprint the blade, if it breaks.
Also another Idea was to make an interchangeable system with hex, torx etc.
The design is still a bit in construction an not yet finished but the CrossBlade is already testet and works pretty well.
Available blades:
- Cross (Philips-Like)
- Hex (12mm)
- Torx (T55)
- Flathead (4mm Thick)
Feel free to leave a comment or send me a DM if you want e specific type or size.
My Print Settings/Instructions
Orientation: Upright.
Layer Height: 0.2mm, 0.15mm, feel free.
Infill: 15% (Depends on durability, for the blade maybe increase the Perimeters)
Support: On build plate only for the blades because of the overhang.
Material: On the photo I used PLA for the handle and black PETG for the blade.