1 / 26
BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw — zdjęcie 1
1 / 26

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shadow LED light added for precise cuts.

Ocena
0 / 5
Polubienia
15
Pobrania
65
Wydruki
0
Wyświetlenia
946
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bosch GCM12SD Shadow LED Light Upgrade – Custom 3D Printed Bracket + Full Install

I designed and installed a custom shadow LED light system for the Bosch GCM12SD Glide Miter Saw, turning this already outstanding tool into a precision-cutting powerhouse, day or night. This mod delivers a crisp shadow cutline for accurate alignment, similar to the precision found in high-end saws with factory shadow lighting.

This project includes:

  • Custom 3D Printed Bracket designed to mount directly to the upper blade guard housing, with no modifications to the saw.
  • Clean cable routing using zip tie anchors and heat-resistant zip ties to maintain safe, secure installation.
  • Low-profile LED strip for consistent shadow casting that activates with the saw’s operation or via a toggle switch.
  • Designed to avoid interference with the saw’s slide mechanism and full bevel/miter range.
  • Includes STL, 3MF, STEP files, and fully pre-sliced G-code for Prusa Mini and MK3S+ (0.4mm nozzle, PETG recommended).

Recommended Print Settings:

  • Material: PETG or ABS (for heat and durability)
  • Layer Height: 0.15mm
  • Supports: Yes (only where needed)
  • Infill: 25-40% for strength

Tools/Parts Needed:

This project is ideal for anyone looking to enhance their Bosch GCM12SD with better visibility and cutline accuracy using 3D printing and a bit of DIY spirit. Feel free to remix or adapt for other saws!