1 / 1
Jig for bending Floyd Rose Special Tremolo Arms (6mm screw type)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig for bending Floyd Rose Special Tremolo Arms (6mm screw type)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Could only find Floyd Rose Special (6mm screw-on type) arms that were bent way wider than 90 degrees and I wanted something closer to 90 so I made this! It's a non-marring jig that can be held with a shop bench vise so you can easily bend to whatever angle is preferred! Jig is not symmetrical so you can orient to whatever makes the most sense to get the cleanest bend without marring anything. Happy printing/shredding!