Generic track/plunge saw guide rail CAD model (For Parkside and alike)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to make some custom attachments for my track saw, but i couldn't find a model or a detailed dimensions…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 564
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to make some custom attachments for my track saw, but i couldn't find a model or a detailed dimensions drawing. So, i sat down with a guide rail and calipers and made this in Onshape. Feel free to use it for whatever you want
STEP and STL files provided for bare rail, and with all added strips (new anti-tearout on the edge, no-slip on the bottom, and low-friction on top)
Onshape original document link: https://cad.onshape.com/documents/1def32f8d06c62b13cb4a183/w/59837da06d0429b6bdd143d3/e/7a9017b157904aab965c563e
This style of guide rails is used by generic cheap tool brands - namely Parkside (EU), Ozito (NZ and AU), ZUBR and Sturm! (RU) and others i do not know of. Just compare the pics to whatever you have.
NOTES:
This model is created based on manual measurements with good calipers and a ruler, but i cannot guarantee sub-mm accuracy
Expect some deviation in manufacturing of each individual piece, as well as natural wear&tear. I was taking measurements on a brand-new 700mm long rail.
0.5 mm fillets are applied to all sharp edges. They are something between .3 and .5 in reality, but .5 looks about right.