Awning Crank Replacement / Markise Kurbel - 15mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement crank for 15 mm awnings – snap-fit design, no glue needed, parts click securely together.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 428
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This printable crank set is designed for awnings with a 15 mm fitting.
For best outdoor durability and UV resistance, printing in PETG (or even better: ASA) is highly recommended instead of PLA.
The parts are designed with snap-fit connectors, allowing them to be printed without supports on smaller printers and easily assembled without glue.
For a complete crank, print the model twice. A 20% infill is recommended for a good balance between strength and material usage.
This is a practical and cost-effective replacement for broken or missing awning cranks!