Clear or Blackout File Cabinet Magnetic Folder Holder Back
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement rear part for the folder holders rear that attaches magnets to and attach to a metal file cabinet.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is for the back of these wall file/paper holders that can be mounted on file cabinet's with this back and flat magnets. They are mounted with the magnets on the same side as the protruding tabs. The tabs and the middle overhang need supports touching the build plate. I highly suggest using PETG or PCTG at least. I haven't tried PLA+. I did end up using superglue and Arm & Hammer to set it quick but a lot less can be used because of the dove tailed design. https://shop.admiralexpress.com/Product/OIC/21434CT/1040919994 https://shop.admiralexpress.com/Product/DEF/73102/1010037608