Gehäuse für Waveshare 7inch Display und Raspi - Housing for Waveshare 7inch Display and Raspi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kompaktes Gehäuse für Display und Raspberry Pi4. Compact housing for display and Raspberry Pi4.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Das Gehäuse ist sehr kompakt konstruiert. Damit die Kabel zwischen Pi und Display montiert werden können, sind zwingend Winkelstecker erforderlich. Für HDMI die Waveshare Adapter verwenden, für USB habe ich einen 180 Grad Adapter verwendet.
Alle Teile werden mit 2,9x12mm Blechschrauben montiert, je nach Drucker müssen eventuell die Löcher auf 2,5mm nachgebohrt werden.
Zur direkten Montage am Druckerrahmen, gibt es hier https://www.printables.com/model/1271931 einen entsprechenden Support.
The housing is compact! To get the cables connected between Pi and Display, you need angled connectors. For the HDMI I used the original Waveshare adapters, for the USB I used a 180 degree connector.
All Parts are mounted with 2,9x12mm sheet metal screws. Depending on print quality you have maybe to redrill the holes with a 2,5mm drill.
For a direct attachement to the printer frame, you can get here https://www.printables.com/model/1271931 a ball joint support.