older model westinghouse upright freezer shelf mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces existing mount points for freezer shelf, reusing the existing button head screw for the original mounts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This older model (2006) Westinghouse side-by-side fridge-freezer used fairly simple wire racks in the freezer, and used a rather simple mechanism to seat them, which I have replicated roughly.
Printed at the face of the angle, so that the layers translate the force from horizontal to vertical, almost like rings made of rope suspending the shelf. I only made one of these as only one of these broke, and the fridge has since been scrapped. An example of something which was very well suited to whipping up a quick design to repair something you wouldn't find parts for.
I opted to print this in ASA, as my quick research suggested it was one of the better options for sub-zero conditions, being just a bit softer than ABS.