Jibbitz Display Stand and Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put your favourite jibbitz on display, and the rest can sit in the tray.
- Ocena
- 4 / 5
- Polubienia
- 18
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 286
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
Update Dec 2025
Added "Double Tolerance" base file an increased tolerance (originally 0.05mm, increased to 0.1mm) on slot between based and display
Added "High Density" display file - moar holes for a collection of smaller jibbitz
Feel free to adjust to your liking via the OnShape document (have parameterised the tolerance mentioned above)
Inspired by many jibbitz display thingies out there, but unable to find one that suited what the young ones wanted, I put this basic one together.
Printing the pieces separately means that you get a nice finish on the display surface, based on your build plate's pattern. However, I have added an all-in-one if that is your preference (untested).
The display board slots into the base (has a 0.05mm clearances in all directions) and has been pretty stable.
V2 has shorter “keyholes” to reduce the amount of hole seen when displaying small jibbitz. It also has a rounded corners on the top of the board
Printed at 0.20mm layer height with a 0.4mm nozzle using Kiwifil PLA Pro Light Marble filament