Holzschrauben-Helfer / Woodscrew helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thingy is supposed to hold the screw perpendicular to the surface of the wood until it has enough grip on its…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 64
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This thingy is supposed to hold the screw perpendicular to the surface of the wood until it has enough grip on its own. Currently this is designed with a fence to hit the middle of a 15mm thick board. It supports screws in the size of 3.0, 3.5, 4.0, 4.5 and 5.0mm. If you turn it over there is no fence - so you can just screw around anywhere. =^_^=
If you need other dimensions just tell me and I'll add a version.
The Fusion 360 file is included so you can also remix freely.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.2
Infill:
20%
Notes:
4 Perimeters, make sure the ring is completely filled so it flexes better.
Category: Hand Tools