1 / 2
MMU2 Festo Holder 1-piece M6 & M10 — zdjęcie 1
1 / 2

MMU2 Festo Holder 1-piece M6 & M10

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2018-11-02 - Updated the filesI've received my MMU2 kit and found the holders are a bit too long - the rubber feet of…

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

2018-11-02 - Updated the files I've received my MMU2 kit and found the holders are a bit too long - the rubber feet of the spool holder were not touching down anymore, it was resting on my holder. I've reduced the lip that snaps the holder in place by 1.5mm and that seems to do the trick.

I've also added a version with M10x0.90 thread (since the connectors I got in the meantime have that thread).

I liked the other remix by StvPtrsn but I have several PC4-M6 connectors here, so I wanted to keep the M6 threads...

Basically I combined the two parts and removed anything standing over...

Category: 3D Printer Accessories

Tagi