Tesla Model 3/Y 2021+ Center Console Tray Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple center console tray, remix of excellent design by renerand and logo from zrides!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
VERY simple remix, just removed the tabs and added Tesla Logo to make it extra dorky! Printed mine in PETG and although you can get away without supports mine was very “stringy” on the cantilevered parts as also reported by others. Also added little strips of the fuzzy part of Velcro to underside of support ledges (see pics) to help prevent tray from sliding back and forth during braking or acceleration. Have fun being a geek!
UPDATE 4/25/25: I did some more editing of the original model in Fusion 360 and uploaded V13. This model has some dividers added and changed the rounded overhangs to 45's. Orca “claims” that no support is needed but haven't tried to print it yet to be sure to see if it would print without being “stringy” and to make sure it fits and works (print at your own risk)