1 / 5
Parkside X20V Battery Carrier 6x/10x
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carrier for six Parkside X20V batteries.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 186
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (33)Powiązane
Overview:
This is carrier for six Parkside X20V batteries.
It is useful for storing and transporting batteries. The model is lightweight, strong, and easy to print, with tilted slots for quick battery insertion and removal.

The carrier can be extended to hold ten batteries using the Parkside_Battery_Carrier_Connection piece and adding one more body on each side.
Keep in mind that this is experimental, I don’t have enough batteries to test it.
I recommend to print it from PETG, ABS or ASA with 3 perimeters and 25% infill.
Bill of Material:
- 8x M4x25mm Allen Bolt
- 8x M4 Nut