Caliper / Depthgauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Depth Caliper / Depthgauge consisting of 3 parts, which is available in different sizes.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey,
this is a Depth Caliper which is useful to measure the depth.
To be clear right from the start, you shouldn't expect the highest precision from a 3D-printed caliper.
You can measure well with it, and I would say the measurement result is accurate to within +- 0.1 mm. It also depends on the person how hard they press or pull when measuring, because the caliper is made out of plastic and not out of metall.
My last model, a normal Caliper, can measure the depth too, but with a depthgauge you can measure the depth better, because this model has a wider mainscale and a larger support area (working face).
The main scale has a recess on the support surface. This ensures that if a radius is present, it is not included in the measurement.
The mainscale is available in 3 different sices:
- 100mm
- 150mm
- 200mm
The working face is available in 3 different sices too:
- 100mm
- 120mm
- 150mm
When assembling, make sure that the connectors are on the correct side.
Print Settings:
Material: PLA (I didnt tried other Materials)
Nozzle: 0,2mm - 0,4mm
Layer height: 0,2mm
Infill: 30% Rectilinear
Wall loops: 4
Supports: Only for Vernier Scale and maybe for the working face (I recommend tree strukures).
To print, arrange and rotate the 3 models as shown in the following image:
If want to make changes or remix my model I have added the Inventor Files.
I hope the Depthgauge is useful for you ;)