Watch wall charger (parametric, included files for Apple and Samsung)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for your smartwatch charger with cable management.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Mount your watch charger on the wall and hide the excessive cable. Included are files for 28mm chargers (Apple) and 30mm chargers (Samsung). You can modify the .f3d file for different charger diameters or adjust the length of the cable management part.
If you want to just stick it on the wall print one of each “0” and “3” files. Select the cover (file 3) based on your mounting preference. The “no cable” option will not have the notch on top and the cable will exit through the bottom hole. The options with mm values will overhang on the back to cover the double sided tape, magnet or velcro tape.
If you want to use screws you have to split the part and print one of each 1+2+3 files. You will need one 2.5 mm countersunk self tapping screw to connect parts 1+2.