Pocket sharpener for Spyderco tri-angle stones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caps for Spyderco stone to use them without Spyderco tri-angle stand
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I have once dropped my Spyderco Tri-Angle sharpening kit and broke one of the stones.
To make use of the broken stone I made these caps. These when put on the end of the stone retain the original 40-degree angle. Although this setup is not as convenient as original stand, they are easier to take outside.
The set contains two caps: one to use the flat stone side and other - to use the stone edge.
It will be probably required to scale the model up or down depending on filament type to make them fit the stone. I had to scale them up to 104% but you'll probably have other settings.