Tactical flashlight pressure switch picatinny rail mount with quick release tab.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed around my Centurion BP-12, puts the pressure switch right where I need it.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 957
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this over the weekend and tweaked it to mount solidly but be able to adjust or remove quickly. This will fit any picatinny rail and is based off the pressure switch for my generic $20 light from Amazon that seems to be fairly ubiquitous.
I've included a STEP file so you can modify it to your needs.
Print on the side with tree supports. You will need some tweezers to clear the supports out of the inside of the release tab. I used a hobby knife to clear the supports from the sides of the release tab.
I included a couple pictures… the bronze one is for contrast against the black body. The black/dark gray one was printed in carbon fiber ABS.