Anycubic Ace Pro Filament Roller upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement roller that supports the filament in the acepro, with provision for bearings.
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 491
- Wydruki
- 4
- Wyświetlenia
- 2934
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Replacement roller that supports the filament in the acepro, with provision for bearings.
The existing rollers (the lower in the picture) just rotate directly on the plastic marginally increasing the resistance to the filament reel turning. Not wishing to give the Acepro any reason to let me down (!) I hoped this will help.
This replacement roller is slightly larger in diameter and includes space for 693ZZ bearings.
Easy fitting
- Put a bearing in each end of the new rollers
- Unclip the old roller
- Put the rod through the new roller and clip it back in
I printed mine vertically with brims. No support necessary. A tiny amount of finishing might be required to remove any remnants of brim etc.
Keep your old rollers just in case!
Enjoy!