Bigtreetech TFT35 E3 Display Housing for 2040 Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remade the face plate to fit the display better (for mine at least)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The Original Model face plate did not fit correctly as the comments on the Original post mentions. I did not read this and printed it finding out it did not fit, so i made remade it to fit better,
I used the info on BTT github page and my actual screen is mine for some reason has a very non centered display, hope this helps anyone. also i have not made a cutout for the wifi or filament connectors as i'm not planning on using these as i use a SKR Pro 1.1 that has all that on the main board itself
Mine is printed in Red PETG following my planned colour of other parts printed