DJI Mavic Pro Remote ID Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a remote ID transmitter without adhesive or modifying the drone.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 392
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This will mount one of the various inexpensive Remote ID transmitters that can be found online from Veeniix, Gleesfun, Holyton, Bwine, Ruko, etc. I have only tested this with the version that doesn't have the beeper.
Print this in PETG, which has a little more flex and less susceptible to developing a shape memory.
Don't use supports. The bridges are very short. I printed it in the Prusa default 0.2mm structural profile.
Once printed, insert the transmitter into the bracket with the buttons/LEDs facing the “closed” end and ensure that the USB port is captured by the little bump on the inside. Then click it into place over the battery release buttons and you are done. See the photo for reference.
I have been able to lift up the drone by the bracket and have to shake the battery very violently to have it separate so this should be sturdy. I also haven't experienced any issues in flight.