Standard size Coral Mounting Plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard size coral plugs. large plugs have same weight density as ceramic. Small plugs are 2g lighter
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
The small plug is 20mm in diameter, 20mm tall, 5mm thick on the attaching disk, and 10mm diameter shaft. The shaft can of course be trimmed off if you are mounting to live rock.
Large plug shaft is the same shaft size as the small, the disk is slightly thicker to add weight
The other plug model has a 5mm hole for gluing corals discreetly. Best for sps and some lps corals like BirdsNest, Blastos, Hammers, etc
Do not use the discrete plug with soft corals like Zoas, Palys, Cloves, etc. Please use the normal one
Print weight is 3g. Regular ceramic plugs are 5g. I am working on a way to make the plugs weight nearly the same.
PRINT AT 100% INFILL OR THEY WILL FLOAT!!
I would suggest using PLA filament for the plugs as it does not degrade in the water.
No supports needed even the discrete mounting plug.
Speed doesn't matter.
I am working on a larger plug so that will be out later.
The corals shown in the pictures are
Everlasting Gobstoppers (1)
FrogSpawn and CandyCane with some BirdsNest in the back (4)