90-Degree Big->3Smalls Adaptor for Monitor Stand Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multifunction Arm Monitor system: monitor clamp mount with three small arm adaptors for mic and lights
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I have a dual monitor set-up and I mod'd this clamp connector by removing the top big gear, replacing it with a angled surface to support two 90-degree small adaptors so you can attach two sets of small arms, for a total of three arms, for holding lights or whatever tickles your fancy. The two new small arms should track parallel to the angle of your two monitors.
For printing, I followed the same parameters as defined in the Multifunction Arm Mounting System.
In the photos, this mod is printed in red and is attached to the blue monitor clamp (below). The blue arm (mic) is the original small arm mount and the two orange arms attach to the new red-small arm mounts. Also angled/positioned so that the mount hardware won't conflict with each other.
This model is meant to clamp onto the monitor stand mod here:
https://www.printables.com/model/878843-clamp-mount-for-monitor-stand-pole