Losi LMT Steering Spindle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the Losi LMT Steering Spindle.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter for the "Losi LMT Steering Spindle." It's a quick fix for a broken adapter until you can get a replacement from the hobby shop. With standard filament, it fits easily, while CF filaments require a bit more force to insert.
Print settings: It is important to print it in a horizontal orientation for maximum strength. I printed it with a layer height of 0.12mm and 20 wall lines, which should achieve 100% infill.
I got the new Losi LMT 2.0 on Saturday, and after just five minutes of driving, this part broke. Monday was a holiday, so it will take some time for the replacement part to arrive. To bridge the gap, I quickly designed and printed this myself.
Please don't consider it a full-fledged replacement—it’s still a 3D-printed part—but it holds up surprisingly well.