Flsun V400 and Sunlu S2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connector to secure the Sunlu S2 to the original filament holder of the V400. Filament guide from the S2 into the V400.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Hi, anyone who has a Sunlu S2 knows the problem when you want to print directly from the dryer. The filament somehow "jams." If you also have a Flsun V400, it gets even worse. I've now found a easy solution for combining the two.
The Sunlu goes on top of the lid and is secured with one part directly to the original filament holder. This keeps it secure and prevents it from falling off.
The other part ensures that the filament unwinds easily and feeds into the printer's original feeder.
Printed with PETG.
Support not required.
Connector with 4 tops, 4 bottoms, 4 walls, and 25% infill.
Filament guides are sufficient with 2/2/2 and 25%.
For the connector, two M4 sealing nuts and matching screws are required.
For the guide, one M4 sealing nut + screw, 1x PETF connector + tube.
Simply apply double-sided tape to the back of the connector around the hole for the connector. Slide the part into the original holder and position the S2 accordingly. Press firmly and lift upwards. Now you can simply drill through.