1 / 8
Prusa XL_2kg & 5kg Grooved ball bearings spool holder — zdjęcie 1
1 / 8

Prusa XL_2kg & 5kg Grooved ball bearings spool holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a spool holder to mount on the side of the Prusa XL that would support the 2 kg and 5kg spools

Ocena
0 / 5
Polubienia
5
Pobrania
9
Wydruki
0
Wyświetlenia
209
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

To mount you will need:

Cylindrical pins:

2x Ø6 x ~70
1x Ø12 x 160 (I used Cylindrical bolt)
Deep groove ball bearings

2 x m6 T-slot spring nuts (T-Nuts should also work)
2 x m6 16mm machine screws (and the driver of course)

I printed my component in PETG. But PLA should also work
Here are the print settings I used for PETG:
 

0.20mm layer height
4 perimeter
5 top and 3 bottom solid layer                                                                          

Infill 15% Gyroid                                                                                                                         Supports activated

Tagi