Cyclone Dust Separator for 3 inches tubes - Remixed for smaller printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed my original model reducing the edges and removing the screw holes to fit in 256mm printer beds
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 150
- Wydruki
- 1
- Wyświetlenia
- 920
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed my previous model to be printed in 256mm printer beds without cutting each part. The edges were removed and groves were inserted to allow gluing the parts instead of using screws.
I increased the botton funnel to 70mm hole to avoid dust clogging.
You will need 2 small pieces of 3 inch tube at inlet and outlet to couple the cyclone and the hose.
I printed the Body and the Funnel with PLA filament with 3 wall loops to increase the strenght.
For the top part, I used 2 wall loops and Tree (auto) Hybrid support style to reduce the print time (it will take around 34h)
You will need some epoxy glue to join the three parts