HoverAir ProMax: Gimbal and Beacon/Joystick Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made these designs for the Hover Air PRO/MAX.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 2
- Wyświetlenia
- 138
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Made these designs for the Hover Air PRO/MAX. As you can see in the pictures, the RC Cover is simply placed on top of the fully assembled Beacon/Joystiks. If you then press the mobile holders together, it is fixed. There is also space in the RC Cover to secure the USB cable for the mobile, so that you always have it with you. In addition, you can also click the Gimbal Cover into it. You can click the Gimbal Cover on without opening the Hover Air.
Important !!!!
The supplied USB cable may be too short or too long. Hover Air supplied different lengths. So you will have to adjust this slightly. This is for a cable of approx. 105mm. (between the plugs)