Inferno Joan: Flame-Fighting Superhero Model

Inferno Joan stands ready to battle any blaze! This meticulously designed 3D printable figurine captures the essence of a fearless female firefighter with superhero flair. Standing approximately 20cm tall, she features incredible detail from her expressive face to her rocket-powered extinguishers.

The model has been designed with 3D printing in mind, with proper overhangs and connection points to ensure successful printing. The figurine comes with:

• Highly detailed facial features with dynamic expression
• Custom firefighter helmet with functional light chamber (can accommodate a small LED)
• Reflective striping detail on the uniform
• Lightning power emblem on chest
• Dual fire extinguishers with flame effect bases
• Sturdy display base with subtle texture
• Optional nameplate attachment point on base

Assembly & Post-Processing Instructions

Printing Tips

1. Print the base with at least 3 walls/perimeters for strength
2. Use higher resolution (0.08-0.12mm layer height) for the head to capture facial details
3. Print extinguishers at 100% infill if using as functional pieces
4. Helmet detail works best with a 0.4mm nozzle or smaller

Assembly Instructions

1. Clean all support material carefully, especially around facial features and uniform details
2. Test fit all connection points before applying adhesive
3. Attach body to the base first, ensuring proper alignment with mounting holes
4. Connect head/helmet assembly to neck joint
5. Attach extinguishers to hands last, using the alignment pins

Painting Recommendations

• Prime with gray or white spray primer
• Base colors:
  • Uniform: Bright red (matte or glossy according to preference)
  • Stripes: Yellow/gold with slight metallic effect
  • Helmet: Same red as uniform with yellow/gold details
  • Skin: Light peach/tan base with pink highlights
  • Hair: Orange-red with yellow highlights
  • Extinguishers: Red with black handles and nozzles
  • Flames: Orange base with yellow dry-brushing and red tips
• Apply gloss clear coat to visor and reflective trim areas

Model Dimensions

• Height: 200mm (approximately 8 inches)
• Width: 120mm (including extinguishers)
• Depth: 90mm
• Base diameter: 70mm

Recommended Print Parameters

• Layer height: 0.12mm for best detail (0.16mm acceptable)
• Infill: 15-20% (25-30% for strength in thin areas like wrists)
• Supports: Required (especially under extinguishers and for head)
• Build plate adhesion: Brim recommended
• Orientation: Standing upright on base

Material Recommendations

• Primary recommendation: PLA/PLA+ for ease of printing and detail
• Secondary options: PETG for added durability
• Special recommendation: Multi-material or post-processing painting for best visual effect
• Compatible with resin printing for exceptional detail (with proper supports and hollowing)

Print Time & Filament Usage Estimates

• Print time: Approximately 18-22 hours (at 0.12mm layer height)
• Filament usage: ~120g total
  • Base: ~25g
  • Body/Uniform: ~60g
  • Head/Helmet: ~15g
  • Extinguishers/Details: ~20g

Recommended License

Creative Commons - Attribution (CC BY 4.0)

• Allows sharing and adaptation with appropriate credit
• Commercial use permitted
• Perfect for a community-oriented design while maintaining attribution

Print Verification

This model has been test printed on:

• Prusa i3 MK3S+ (0.4mm nozzle)
• Elegoo Mars 2 Pro (resin)

Print Gallery Recommendations

• Include photos of the finished print from multiple angles
• Show both painted and unpainted versions if available
• Close-up shots of face and emblem details are recommended
• Include at least one size-reference photo with common object