1 / 1
Elevation Change Gauge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This simple part can help you quickly determine if a small change in elevation on a walkway is ASTM F1637 or building code compliant. Changes in elevation on walking surfaces cannot exceed a quarter inch or a half inch if it is beveled. The model above is designed to for over and be the “negative” of the elevation change being measured.
Please confirm accurate dimensions after printing by using calipers or a ruler. Be aware that warping of the part can occur if printed in PLA and left outside in hot weather, therefore PETG or ABS is recommended for this part.