1 / 2
EP-133 Stand Legs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 x minimalist stand legs for the Teenage Engineering EP-133 K.O. II
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2x 3D-printed stand legs (left and right) for the Teenage Engineering K.O. II sampler. They're a compact minimalist stand solution for displaying and playing the device at a 20 degree angle.
I did lots of testing and The legs connect to the device's rear feet with a snug and stable fit (but not so snug that you can't remove them with ease).
There are 4 files:
- Left leg
- Left connector part
- Right leg
- Right connector part
Notes:
- I use trees as support for the legs themselves (only a small part of the build needs support), while the connector parts need no support. I tried glue-less prototypes, but just couldn't get a satisfactory connector that would fit snugly with the sampler that way.
- The connectors need to be glued to their corresponding legs. I use 2-part epoxy applied to the points of contact and clamp overnight. I recommend clamping them without glue to see if you're able to glue the parts together without a clamping jig.
- I haven't shared my own simple jig as printing will be a bit wasteful if people are able to clamp in some other way, but please let me know if you find you need it and I'll happily share.
Please let me know if you have any problems. If you like the design, please consider donating via the Ko-Fi link in my profile :)