2oz spray bottle holder for Gridfinity with embedded magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small 2oz spray bottle holder for the Gridfinity storage system. It can hold bottle up to 35mm wide (1.375in)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small spray bottle holder for the Gridfinity storage system. It will fit a bottle up to 35mm(1.375in) wide such as this one on Amazon.
It uses embedded 6x2mm magnets to attach to base plate.
This is the base plate i use it with :
https://www.printables.com/model/1265400-gridfinity-wall-mount-base-plate
Instructions:
To install the magnet, you must add a pause instruction at layer 13. When the printer pauses, install the magnets and resume printing.
IMPORTANT: Make sure that the magnets are all put in the same orientation as the ones in the base plate so that the magnets attract each others.