Pint-ish Ice Cream Container Holder w/Spoon Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a pint of ice cream and has an integrated spoon holder.
- Ocena
- 4,75 / 5
- Polubienia
- 190
- Pobrania
- 702
- Wydruki
- 5
- Wyświetlenia
- 2683
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by something that was sent to me on Instagram. So, I created my own. Holds a pint of ice cream and has an integrated spoon holder. Not really sure if there are different diameters of ice cream out there, I would guess there are….so….the major diameter of this piece is 3.74"/95mm; Minor Diameter 2.96"/75mm; height 3.51"/89mm. There are now two version, see revision notes below.
**5/7/2025: Added version with the base that has a 55 degree chamfer on it. Some noted
that if the base was flat it made for a sharp edge. If you do print it, as a
suggestion just run a razor blade to knock edge off.
Designed in Solidworks