1 / 8
Tineco Adapter z.B. A30s  /  Tineco adapter e.g. A30s — zdjęcie 1
1 / 8

Tineco Adapter z.B. A30s / Tineco adapter e.g. A30s

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Der Adapter passt z.B. für Tineco A30s.Für die Variante mit Rastfunktion wird noch eine Druckfeder mit…

Ocena
0 / 5
Polubienia
1
Pobrania
21
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Der Adapter passt z.B. für Tineco A30s.

Für die Variante mit Rastfunktion wird noch eine Druckfeder mit Außendurchmesser kleiner 10 mm und Innendurchmesser größer 7 mm, hier müsst ihr testen, was funktioniert, hatte hier noch eine herumliegen, kann daher nichts verlinken

Die Version ohne Rast habe ich noch nicht getestet, fall diese Rutscht einfach nochmal etwas kleiner drucken oder z.B. einen selbstklebenden Filz oder etwas Ähnliches in den großen Innendurchmesser kleben

Die Fusion360 Datei ist angehängt, ist aber keine saubere Konstruktion, ist eben so hin geworden ;-)


The adapter fits e.g. for Tineco A30s.

For the version with detent function, a compression spring with an outer diameter of less than 10 mm and an inner diameter of more than 7 mm is required, you will have to test what works here, I still had one lying around, so I can't link anything

I haven't tested the version without a detent yet, if it slips, just print it a little smaller or glue a self-adhesive felt or something similar into the large inner diameter.

The Fusion360 file is attached, but it is not a clean construction, it just turned out that way ;-)

Category: 3D Printing

Tagi