J1772 EV Charger Dummy Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dummy Socket to store your J1772 style EV Charger
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A dummy socket for docking your J1772 style EV charger when not in use. Say goodbye 👋 to the plug dangling on the ground and getting dust, dirt, water, and snow in it, “Click” it into this dock and save yourself the headache!
Designed to work with standard J1772 style EV chargers. The angle of the port is designed specifically for the Level 1 charger provided with PHEV Mopar vehicles (Jeep, Dodge, Chrysler), such that the handle hangs vertically, BUT it should be quite close for most chargers out there, try it yourself!
If you print this design, please leave a comment about how it fits for your specific charger! Help other who find this 😉
Recommended to print the model with PETG, ABS, or ASA for outdoors where it is UV exposed. Personally printed with 5 wall loops and 15% cubic infill in PETG to maximize longevity of use.