1 / 3
Press Arm - QIDI X-Max 3 (Post Extruder) Filament cutter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A alternate blade press arm for my the QIDI X-Max 3 Filament cutter
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (29)Powiązane
This part has not been tested yet!
This should used a #4 hobby blade snaped to a length of 16.2mm and a spring less than 6mm in diameter.
