1 / 10
FMTV LMTV MTV Seal Driver Adapters — zdjęcie 1
1 / 10

FMTV LMTV MTV Seal Driver Adapters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter plates to transform readily available commercial seal drivers into specialty tools for FMTV hub service

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

These adapter plates are designed per the TM to transform the following readily available commercial seal drivers into specialty tools for FMTV hub service:

The commercially available seal drivers attempt to drive the seals via their inner rubber parts (see pictures below), increasing work and the potential for damage.  Flipping the plates around and using 100% infil 3D printed adapters worked great for all 4 hubs and have no signs of damage.

I have also included an entirely 3D printed CTIS seal driver.  It worked OK but the National metal rod + alumimum plate + 3D printed adapter combo felt more solid to me.

Print Settings (Adapters):

tl;dr: PLA | 3/3/3 | 100% Infil | No Brim

Material: Dealers choice.  I used Elegoo Rapid PLA+.  Any will work for 4-12 seal installations.
Layers: 3 Walls/3 top layers/3 bottom layers (Basically N/A with 100% infil)
Infil: 100% (whatever pattern you want)
Supports: N/A
Brim: No

 

Print Settings (CTIS seal driver):

tl;dr: PLA | 5/5/5 | 30% Gyroid | Auto Brim

Material: Dealers choice.  I used Elegoo Rapid PLA+ to test with
Layers: 5 Walls/5 top layers/5 bottom layers 
Infil: 30% Gyroid
Supports: N/A
Brim: Auto

 

Non adapted plate leaves a gab on the metal outside edge and contacts inner rubber portion.  When you attempt to drive this, you have to take up the slack of the inner rubber depleting energy.

Adapted perfect fit.

Same with hub seal

 

Those are affiliate links above.  I support your freedom to use them and help me pay for filament, or not.  Thanks for reading !

Tagi