1 / 1
Anycubic Kobra 3 Max - PTFE Holder for 8 colors — zdjęcie 1

Anycubic Kobra 3 Max - PTFE Holder for 8 colors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anycubic Kobra 3 Max - PTFE Holder for 8 colors

Ocena
5 / 5
Polubienia
69
Pobrania
620
Wydruki
1
Wyświetlenia
2377
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model allows to guide the PTFE tubes for up to 8 colors/filaments from the top to the extruder. It is pivot mounted using a 608ZZ bearing so that the stiffness of the PTFE tubes is relaxed towards the printhead. The tubes are fixed using two M3x6 screws and two M3 thread insets.

 

I use it with:

 

Print settings:

- Material: PLA
- Nozzle: 0.4mm
- Layer: 0.2mm
- Profile: 0.2mm structural
- Supports: yes, on buildplate; brim


Made with passion by Xargas! Like what you see? You can support my work and help me create more awesome stuff via club membership or by purchasing one of club models.

Tagi